FEELALIVEAGRI Sunstrip Kit
1400mm long matte black universal sunstrip, supplied with a 1 metre FEELALIVEAGRI decal in golden yellow. Choose between a gloss or matte logo finish to suit your style.
This is a universal sunstrip and can be cut to size once applied, making it suitable for a wide range of vehicles.
⚠️ WARNING: This isn’t the easiest product to apply and definitely isn’t for the faint-hearted. Take your time and follow the instructions carefully.
What you’ll need:
Window cleaner and a microfibre cloth
Soapy water (bowl with cloth or spray bottle)
Squeegee or plastic card (used inside a microfibre cloth)
Tape measure and masking tape / pen (recommended to centre it properly)
Stanley-style blade / knife
A second pair of hands (strongly recommended)
❗ Do not apply in extreme hot or cold temperatures. Vinyl should be at room temperature before fitting.
Application Instructions:
Step 1:
Clean the window thoroughly with window cleaner and a cloth. Make sure there’s no dirt or residue.
Step 2:
Offer the sunstrip up to the window before removing the backing paper. Measure each end so it’s equal and mark with masking tape or a pen if needed.
Step 3:
Spray or wipe the window with soapy water — don’t be shy, give it a good soak.
Step 4:
Peel the strip off the backing paper (this is where extra hands help) and apply it to the windscreen.
Step 5:
The soapy water will allow the strip to move. Position it correctly, then start squeezing the water out.
Step 6:
Carefully trim around the edges and remove any excess vinyl. Once trimmed, go over the edges again to ensure it’s properly stuck.
Step 7:
Clean the sunstrip with window cleaner to remove any soapy residue and dry it.
Step 8:
Apply the FEELALIVEAGRI decal to the sunstrip.
Step 9:
Job’s a good one — enjoy!
📸 Post your results on Instagram @feelaliveagri_official using #feelaliveagri for a chance to be featured.
FREE P&P (UK only)

